Widespread throughout Eastern USA. The white oak group
comprises many species, of which about eight are
White oak is similar in color and appearance to
European oak. The sapwood of American white oak is light
colored and the heartwood is light to dark brown. White
oak is mostly straight grained with a medium to coarse
texture, with longer rays than red oak. White oak
therefore has more figure.
White oak machines well, nails and screws well although
pre-boring is advised. As it reacts with iron, galvanized
nails are recommended. Its adhesive
properties are variable, but it stains and polishes to a
good finish. The wood dries slowly and care is needed to
avoid checking. Due to its high shrinkage, it can be
susceptible to movement in performance.
A hard and heavy wood with medium bending and crushing
strength, low in stiffness, but very good in steam
bending. Southern white oak is faster grown with wide
growth rings, and tends to be harder and heavier.
Specific Gravity: 0.68 (12% M.C.)
Average Weight: 769 kg/m3 (12% M.C.)
Average Volumetric Shrinkage: 12.6% (Green to 6% M.C.)
Modulus of Elasticity: 12,273 MPa Hardness: 6049 N
* Values for Q. alba
The heartwood is resistant to decay, extremely resistant
to preservative treatment, and the sapwood is moderately
resistant to treatment.
USA: Readily available but not as abundant as red oak.
Export: Very widely available in lumber and veneer, in a full range of qualities and specifications. The most important hardwood export.
Construction, furniture, flooring, architectural joinery, exterior joinery, moldings, doors, kitchen cabinets, paneling, railway sleepers, timber bridges, barrel staves, coffins and caskets. White oak can vary in color, texture, characteristics and properties according to the growing region. It is therefore recommended that users and specifiers work closely with their suppliers to make sure the wood they order is suited to their specific needs. Northern and Southern may be sold separately.